|
|
 |
 |
|
|
 |
| 40 FAQs Found |
|
|
Question |
Date |
| 1 |
I recently purchased a Super Micro X7SPA-HF motherboard, and was excited to try out the IP-KVM feature. I installed IPMIview software on my Mac Mini with Lion and logged fine into the app interface. When launching the KVM console, applet failed with an error no. iKVM64 in java.library.path. |
02/06/12 |
| 2 |
I have one mainboard, X8DTU-Ln4F+, and trying to configure IPMI to dedicated LAN mode only. However, I had many systems in hands and looking for any tool with raw command to do this modification. Is it possible? |
02/06/12 |
| 3 |
I am using the X8DTH-6F motherboard in SC825TQ-R720LPB chassis. The hard drive bays are connected to the onboard LSI 2008 SAS controller. I installed 8 drives in it, and I can see all 8 drives in RAID BIOS. However, the slot ID of two different hard drives is duplicated. That happens in every other drive. This prevents me from creating the RAID array using all 8 drives. How can I fix it? |
02/06/12 |
| 4 |
I upgraded the firmware in AOC-USAS2LP-H8iR to the latest firmware posted in your FTP site. The upgrade was a success, however, after the reboot, the firmware can’t be initialized. I tried to re-flash the firmware again, but it complaints that no compatible device was found. I read an online article talking about the firmware recovery may help. What’s the procedure of the firmware recovery? |
02/06/12 |
| 5 |
One of our 1U server's power supply seems to be about to die. The server has an X5 SCSI board with 3 hot-swap drive bays. The PWS-0036 in it is an EOL. Can I use the PWS-0037, instead? It’s listed with 2U form factor. |
02/06/12 |
| 6 |
When I was flashing the IPMI firmware for X8DTT-IBXF from a remote server outside the data center, I got an error message “Cannot create IPMI session” or something similar. The command I used is:
./Yafuflash -full -force-boot -nw -ip -u -p .ima
Is there any TCP/IP port still needs to be opened? |
02/06/12 |
| 7 |
I installed AOC-SAS2LP-MV8 on C7P67 slot 4, and the HDD on SAS2LP-MV8 would disappear every time I copy files from onboard SATA2 HDD to MV8 HDD in Windows 7. Do you have solution for this? |
02/05/12 |
| 8 |
Will X9SCV-Q motherboard support i3-330M processor? The i3-330M socket is PGA988. |
02/03/12 |
| 9 |
Is there a way to configure to 'always power on' after power failure, with the PTJBOD-CB1? |
02/03/12 |
| 10 |
Does the X7SPA-HF support booting from the PCI-E slot (for example an OCZ RevoDrive)? |
02/03/12 |
|
|
|
|
|
Support Home
Online Support