 |
 |
| SYS-7036A-T |
- SuperServer 7036A-T (Black)
|
| |
 |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
| QPI |
|
| |
 |
| Memory Capacity |
- 6x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
 |
| Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers |
- 2x Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- Realtek ALC883 7.1 HD audio
|
| Super I/O |
|
| |
 |
| PCI-Express |
- 1 (x16) PCI-E 2.0
- 1 (x4) PCI-E 2.0 (in x16 slot)
- 1 (x4) PCI-E
|
| PCI |
|
| |
 |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN |
|
| USB |
- 2x USB rear ports
- 1x USB on-board
- 2x USB internal headers
- Total 6 USB 2.0 Compliant
|
| Audio |
- Realtek ALC883 7.1 HD audio
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
| |
 |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
 |
| |
 |
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available Colors |
|
| |
 |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports |
- 2x Front side USB ports (USB 2.0 ready)
|
| |
 |
| Hot-swap |
- 4x 3.5" SATA hot-swap drive bays
|
| Peripheral Bay |
- 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
| |
 |
| Floppy |
- Teac Floppy Drive 3.5" 1.44MB (Optional)
|
| |
 |
| Fans |
- 1x 9.2cm Front Thermal Fan
- 1x 12cm Exaust Fan (Optional)
|
| |
 |
| 4 x 3.5" SATA Backplane |
| |
 |
| 665W AC-DC power supply |
| AC Input |
- 100 - 240V, 50-60Hz, 10-5 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| Certification |
 80 PLUS Bronze Certified [ Test Report ]
|
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator
|
| FAN |
- Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|