 |
|
 |
| SYS-7034A-i |
- SuperServer 7034A-i (Beige)
|
| SYS-7034A-iB |
- SuperServer 7034A-iB (Black)
|
| |
|
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| |
|
|
| Memory Capacity |
- Six 184-pin DIMM sockets
- Supports up to 12 GB DDR 333
- Supports up to 24 GB DDR 266
- Dual channel memory bus
- Memory must be populated in pairs
|
| Memory Type |
- DDR333/266 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| |
|
|
| Chipset |
- Intel® E7525 chipset
- MCH + 6300ESB + 82541GI
|
| SATA |
- 6300ESB support for 2x SATA ports
- RAID 0, 1, and JBOD support
|
| Network Controllers |
- 1x Intel® 82541GI Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- AC'97 audio CODEC with high quality 6-channel sound
|
| |
|
|
| PCI-Express |
|
| PCI-X |
- 2x 64-bit 66MHz PCI-X (3.3V) slot
|
| PCI |
- 2x 32-bit 33MHz PCI (5V) slot
|
| |
|
|
| Serial ATA |
- Two Serial ATA ports
- Two SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- Up to 4 USB 2.0 ports
- 2x ports, 2x headers
|
| Audio |
- 1x Line In / Line Out / Microphone ports
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
| Parallel Header |
- 1 ECP/EEP parallel header (CBL-081)
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.1
- ACPI 2.0
|
|
|
|
|
|
| Form Factor |
Mid-Tower |
| Model |
SC733i-645 |
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports |
- 2x Front side USB ports (USB 2.0 ready)
|
| |
|
|
| Drive Carrier |
- 4x Internal IDE Drive Carriers
|
| Peripheral Bay |
- 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
| |
|
|
| Floppy |
- TEAC 3.5" 1.44MB Floppy Drive
|
| |
|
|
| Fans |
- 1x 12cm PWM rear exhaust fan
- 1x 9cm PWM fan
|
| |
|
|
645W Low-Noise AC power supply with PFC
[ 24-pin, (4-pin, 8-pin) = 12V ] |
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 11 - 5Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
|
| CPU |
- Monitors for CPU Cores (0.865V to 1.6V), +3.3V, +5V, ±12V, 5V Standby
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V
- Adjustable CPU clock frequency ratio settings (via BIOS)
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU, chassis, environment
- CPU thermal trip support
|
| LED |
- CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
|
