 |
 |
| SYS-6024H-32R |
- SuperServer 6024H-32R (Beige)
|
| SYS-6024H-32RB |
- SuperServer 6024H-32RB (Black)
|
| |
 |
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
 |
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
 |
| Chipset |
- Intel® E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
|
| SAS |
- Adaptec AIC9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
|
| SATA |
- 6300ESB 2-port SATA Controller
|
| SAS ZCR |
- RAID 0, 1, 5, 10, and JBOD support
- Support for Zero-Channel RAID
- Optional Card not included
|
| IPMI |
|
| Network Controllers |
- Dual Intel® 82541PI Single-Port Gigabit Controller
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
| |
 |
| Serial ATA / SAS |
- Two SAS connectors support up to 8 SAS or SATA drives
- Two SATA connectors support 2 SATA drives
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports
- 1 header
|
|
 |
| |
 |
| Height |
3.5" (89mm) |
| Width |
16.8" (426mm) |
| Depth |
25.6" (650mm) |
| Gross Weight |
51 lbs (23.1kg) |
| Available Colors |
Beige, Black |
| |
 |
| Buttons |
Power On/Off button
System Reset button
|
| LEDs |
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Power Fail LED
|
| Ports |
2x USB Ports (optional) |
| |
 |
| PCI-Express |
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| PCI |
|
| |
- (Low-profile Add-on Cards Only)
|
| |
 |
| Hot-swap |
6x 3.5"SATA Hot-swap drive trays |
| Peripheral Bay(s) |
1x 5.25" full-height peripheral bay |
| |
 |
| Floppy |
Panasonic 3.5" 1.44MB Floppy Drive |
| |
 |
| 1x 2U SAS Backplane (without SESII) |
| |
 |
| Fans |
4x 80mm 6300 RPM fans Cooling redundancy with fan shroud |
| |
 |
500W (1 + 1) Redundant AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ] |
| AC Voltage |
100 - 240V, 50/60Hz, 10 Amp |
| DC Output |
5V + 3.3V ≤ 160W 12V Total ≤ 39 Amp |
| +5V |
30.0 amp |
| +5V standby |
2.0 amp |
| +12V1 |
15.0 amp |
| +12V2 |
15.0 amp |
| +12V3 |
18.0 amp |
| -12V |
1.0 amp |
| +3.3V |
21.0 amp |
| |
 |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
| |
 |
| CPU |
- Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
|
| FAN |
- Total of four 4-pin fan headers and four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|