 |
|
 |
| SYS-6022-P8R |
- SuperServer 6022P-8R (Beige)
|
| SYS-6022-P8RB |
- SuperServer 6022P-8RB (Black)
|
|
|
| CPU |
|
• Dual mPGA603 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz |
 |
| System Bus |
|
400MHz system bus |
|
|
|
| Memory Capacity |
|
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR200 memory
• Dual channel memory bus
• Memory must be populated in pairs |
|
| Memory Type |
|
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
|
|
| Chipset |
|
• Intel® E7500 chipset
• MCH + ICH3-S + P64H2 |
|
| SCSI |
|
• Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI |
|
| RAID |
|
Support for Zero-Channel RAID w/ ZCR Card (Card NOT included) |
|
| IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
|
| Network Controllers |
|
• Dual Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
|
|
| 6x low-profile full-length 64-bit PCI-X expansion slots |
|
|
|
| PCI |
|
• Max 2x 64-bit 133MHz PCI-X (3.3V) slots
Default:
• 2x 64-bit 100/66MHz PCI-X (3.3V) slot
• 3x 64-bit 66MHz PCI-X (3.3V) slots
• 1x VXB (Virtual Extended Bus) slot
|
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
|
| USB |
|
Up to 5 USB ports |
|
| Serial Ports |
|
2 Fast UART 16550 serial ports |
|
| Parallel Port |
|
1 ECP/EEP parallel port |
|
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with Phoenix® BIOS |
|
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection |
|
|
|
|
|
| Form Factor |
|
2U Rackmount |
|
| Model |
|
SC822R-400LP |
|
|
|
| Height |
|
3.5" (89mm) |
|
| Width |
|
16.8" (426mm) |
|
| Depth |
|
25.6" (650mm) |
|
| Gross Weight |
|
49 lbs (22.3kg) |
|
| Available Colors |
|
Beige, Black |
|
|
|
| Buttons |
|
• Power On/Off button
• System Reset button
|
|
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power Fail LED
|
|
|
|
| Hot-swap |
|
6x 3.5"SCA Ultra320/160 Hot-swap drives |
|
| Peripheral Bay(s) |
|
1x 5.25" full-height peripheral bay |
|
|
|
| 1x Single-Channel 2U SCA Ultra320/160 backplane (w/o SAF-TE) |
|
|
|
| Redundant 2U 400W AC power supply w/ PFC |
|
| AC Voltage |
|
• 100 - 240V, 50/60Hz, 8 Amp |
|
| DC Output |
|
• 5V + 3.3V ≤ 200W |
|
| +5V |
|
30.0 amp |
|
| +5V standby |
|
2.0 amp |
|
| -5V |
|
1.0 amp |
|
| +12V |
|
24.0amp |
|
| -12V |
|
0.5 amp |
|
| +3.3V |
|
30.0 amp |
|
|
|
| CPU |
|
• Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
|
| FAN |
|
• Total of seven 3-pin fan headers
• 4x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection (through LDCM)
• Chassis intrusion header
• Chipkill support |
|
|
