 |
|
 |
| MBD-X6DHP-TG-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 9.6" x 16.2" (24.4cm x 41.1cm)
|
| |
|
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
|
| |
|
|
| Memory Capacity |
- Six 184-pin DIMM sockets
- Supports up to 12 GB DDR 333MHz memory or
- Supports up to 24 GB DDR 266MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
|
| Memory Type |
- DDR333/266MHz Buffered (Registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
|
| SATA |
- ICH5R Controller for 2 SATA ports
- RAID 0, 1, JBOD support
|
| SATA |
- Adaptec AIC-8130: Marvell 88SX6041 4-port Hercules-2, rev C0, SATA Controller (or)with 3rd-Party Adaptec AIC-8110: Marvell 88SX5041 4-port Hercules-1, rev C0, SATA controller
(4x drive)
- RAID 0, 1, JBOD support
|
| Zero-Channel RAID |
- Support for Zero-Channel RAID
- [Card not included]
- RAID 0, 1, 10, 5, JBOD
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 (Optional [1U: AOC-1UIPMI-B])
|
| Network Controllers |
- Intel® 82546GB Dual Port Gigabit Controller
- Supports 10Base-T, 100Base-TX, 1000Base-T, RJ45 output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| Serial ATA |
- Six Serial ATA ports
- Up to 6 SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA/ IDE devices
- Supports UDMA Mode 5 and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 1x USB internal headers
- USB 2.0 / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial headers
|
|
|
|
|
|
| 1U Chassis |
|
| Important Chassis Notes |
- To ensure system stability, a 420W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
| |
|
|
| PCI-Express |
|
| PCI-X |
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS, Intel SST
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Wake-On-Ring (WOR) header
- Internal/External modem ring-on
- Power-on mode control for AC power loss recovery
|
| |
|
|
| Voltage |
- Monitors for CPU Cores, +3.3V, +5V, ±12V, +3.3V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
|
| FAN |
- Total of five proprietary fan headers supporting up to 10 fans
- Status monitor for speed control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC support
|
|
