 |
|
 |
| MBD-X7DCT-3-O |
- X7DCT-3(Standard Retail Pack)
|
| MBD-X7DCT-3-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 16.4" x 6.5 " (41.66cm x 16.51cm)
|
| |
|
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300
sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus |
- 1333 / 1066 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
|
| Memory Capacity |
- Six 240-pin DIMM sockets
- Supports up to 48 GB 667/533MHz DDR2 ECC Register DIMM memory
- Dual channels memory bus
|
| Memory Type |
- 677/533MHzECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® 5100 (San Clemente) chipset
- Intel® ICH9R SB
|
| SAS |
- LSI SAS1064E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| Network Controllers |
- Intel® 82575 Dual-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| SAS |
|
| LAN |
|
| USB |
- 2 rear + 1 Type A connector + 2 headers (2 Ports)
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Serial Port |
- 1 Fast UART 16550 serial port
|
|
|
|
|
|
| 1U Chassis |
|
| |
|
|
| PCI-Express |
- 1 (x8) PCI-e (using x16 slot)
|
| |
|
|
| BIOS Type |
- 16Mb SPI Flash with Phoenix ® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
|
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechansim
- Power-on mode for AC power recovery
|
| |
|
|
| Voltage |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of three 4-pin PWM fans
- 3x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 3x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
|
| Other Features |
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
