 |
 |
| Form Factor |
|
Extended ATX |
 |
| Dimensions |
|
12" x 13" (30.5cm x 33.0cm) |
|
|
|
| CPU |
|
• Dual mPGA603 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz |
|
| System Bus |
|
400MHz system bus |
|
|
|
| Memory Capacity |
|
• Four 184-pin DIMM 25° sockets
• Supports up to 8 GB DDR200 memory
• Dual channel memory bus
• Memory must be populated in pairs |
|
| Memory Type |
|
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
| DIMM Sizes |
|
128 MB, 256 MB, 512 MB, 1 GB, 2 GB |
|
| Memory Voltage |
|
2.5 V only |
|
|
|
| Chipset |
|
• Intel® E7500 chipset
• MCH + ICH3-S + P64H2 |
|
| SCSI |
|
• Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI |
|
| RAID |
|
Support for Zero-Channel RAID with Supermicro Socket DIMM All-In-One ZCR Card AOC-SOZCR1
(Card NOT included) |
|
| IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
|
| Network Controllers |
|
• Dual Port Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
|
|
| PCI Expansion |
|
• 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot with SXB (Supermicro Extended Bus) slot
• 1x slim 64-bit 100MHz PCI (3.3V) slot
|
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
|
| USB |
|
Up to 5 USB ports |
|
| Serial Ports |
|
2 Fast UART 16550 serial ports |
|
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
|
|
|
|
| 1U Chassis |
|
• SC812S-400
• SC813S-500 |
|
| Important Note |
|
To ensure system stability, a 350W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with Phoenix® BIOS |
|
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Hardware BIOS virus protection |
|
|
|
| Software / Hardware |
|
• Optional IPMI (Intelligent Platform Management Interface) 1.5
• Super Doctor III
• Watch Dog |
|
| Power Configurations |
|
• ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Keyboard Wakeup from Soft-Off
• CPU Fan auto-off in sleep mode
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on |
|
|
|
| CPU |
|
• Monitors for CPU Cores,
+1.8V, +3.3V, +5V, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator with
auto-sense from 1.3V-1.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
|
| FAN |
|
• Total of three 3-pin fan headers
• 3x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header
• Chipkill support |
|
|
