 |
|
 |
| MBD-P8SGA-V-O |
- P8SGA-V (Standard Retail Pack)
|
| MBD-P8SGA-V-B |
|
|
|
|
| Form Factor |
|
| Dimensions |
- 11.5" x 9.6", (29.2cm x 24.4cm)
|
| |
|
|
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® 4 processor (800MHz FSB) or
- Supports an Intel® Celeron® processor with 256KB L2 Cache (533MHz FSB)
- Hyper-Threading (HT) enabled
|
| System Bus |
|
| |
|
|
| Memory Capacity |
- Four 184-pin DIMM sockets
- Supports up to 4 GB of unbuffered, non-ECC DDR400/333MHz memory (Dual Channel Memory Bus)
|
| Memory Type |
- DDR400/333MHz unbuffered, non-ECC SDRAM, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 128 MB, 256 MB, 512 MB, 1 GB
|
| Memory Voltage |
|
| |
|
|
| Chipset |
- Intel 915G-V (Grantsdale) chipset
- ICH6 + FWH + Intel® 82541PI
|
| Serial ATA |
- Intel® ICH6 SATA controller built-in
|
| Network Controllers |
- Single-port Intel® 82541PI Gigabit Ethernet Controller
- Supports 10BASE-T, 100/1000BASE-TX,
RJ45 output
|
| Graphics |
- On-chip third generation integrated
gfx graphics core
|
| Audio |
- AC'97 audio CODEC with high quality 6-channel sound
|
| Super I/O |
|
| Clock Generator |
- ICS954141DF chip
- (Over-Clock Enable)
|
| |
|
|
| Serial ATA |
- Four Serial ATA ports
- Four SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| Infrared |
|
| LAN |
|
| USB |
- 6x USB 2.0 / 1.1 rear ports
- 1x USB 2.0 / 1.1 header for 2x ports
|
| VGA |
|
| Audio |
- 1x Line In / Line Out / Microphone ports
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
| Parallel Port |
- 1x ECP / EEP Parallel Port
|
|
|
|
|
| Important Note |
- To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
|
| |
|
|
| PCI-Express |
|
| PCI |
- 3x 32-bit 33MHz PCI (5V) slots
|
| |
|
|
| BIOS Type |
- 4Mb Flash EEPROM with AwardBIOS®
- 49LF004B/SST
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- ACPI 1.0 (limited)
- BIOS rescue hot keys
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
| |
|
|
| Software |
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Suspend to RAM (STR)
- Power-on mode control for AC power
loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors for CPU Cores (+3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of three proprietary fan headers
- Total of three 4-pin fan headers
- 3x fans with tachometer monitoring
- Status monitor for speed control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis, environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
|
| LED |
- +5V standby voltage alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
