 |
|
 |
|
|
|
|
Top View
|
Air Shroud View

|
Rear View
|
Available Colors
|
|
 |
Key Features
1. 760W Triple-Redundant Power Supply
2. 15x Hot-swappable SAS Drive Bays
3. Hard Drive Backplane with 2x 28-Port 3Gb/s SAS Expander Chips & Enclosure Management
4. 6x Full-height, Full-length expansion slot
5. 100% Cooling Redundancy
6. Power Switch & 5 LED Indicators
7. Can be configured as either HEAD
Or JBOD unit

|
|
 |
| Downloads |
|
|
|
|
 |
|
|
 |
|
 |
 |
| CSE-933E2-R760 |
- SuperChassis 933E2-R760 (Beige)
|
| CSE-933E2-R760B |
- SuperChassis 933E2-R760B (Black)
|
| |
 |
3U chassis support for motherboard size - 12" x 13" E-ATX and 12" x 10" ATX |
| |
 |
|
Supports dual, single Intel® / AMD processors
|
| |
 |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
 |
| 6x PCI expansion slots |
| |
 |
| Hot-swap |
- 15x Hot-swap Drive Bays
- SAS or enterprise SATA HDD only recommended
|
| |
 |
3U Dual Expander Backplane, features:
Scalability through cascading
3Gb support
Inband SES-2 Enclosure Management
SAS/SATA support
Dual input/output SFF 8087 connectors
|
| |
 |
| Buttons |
- Power On/Off button
- System Reset button
- Alarm Mute Switch
|
| LEDs |
- Power LED
- Network activity LED
- System Overheat LED
- Power Fail LED
|
| Ports |
- 2x Front USB Ports
- 1x RJ45 Port
|
| |
 |
| Fans |
- 4x 9cm 3,500 RPM Hot-swap PWM Fans
- 2x Rear Exhaust PWM Fans
|
|
 |
 |
 |
| Chassis intrusion switch |
| |
 |
 |
| Operating Temperature Range |
|
| Non-Operating Temperature Range |
-
-40°C ~ 60°C (-40°F ~ 140°F)
|
| Operating Relative Humidity Range |
-
8% ~ 90% (non-condensing)
|
| Non-Operating Relative Humidity Range |
-
5% - 95% (non-condensing)
|
 |
 |
760W Triple-Redundant AC to DC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] |
| AC Voltage |
- 100 - 240V, 50-60Hz, 14 - 8 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
 |
| Power Supply Safety / EMC |
- USA - UL listed, FCC
- Canada - CUL listed
- Germany - TUV Certified
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
|
|
|
|
 |
 |
|
 |
|
 |
 |
| |
Part Number |
Qty |
Description |
| SC933E2-R760 Chassis |
CSE-933E2-R760(B) |
1 |
3U Chassis (B = Black) |
| Cables |
CBL-0108L-02 |
2 |
39cm iPass to iPass SAS Cable |
| Fan(s) |
FAN-0062L4 FAN-0064L4 |
2 4 |
8cm Rear Exhaust PWM Fan 9cm Hot-swap PWM Cooling Fan |
| Hard Drive |
CSE-PT39(B) BPN-SAS-933EL2 |
15 1 |
Hot-swap drive tray (B = Black) SC933 Backplane with Two LSI SASX28 Expander Chips |
| Mounting Rails |
CSE-PT50L |
1 |
3U Chassis Mounting Rails; 31.1" - 32.6" |
| Power |
PWS-0050M CSE-PT933-PD382 |
3 1 |
380W Power Modules for 760W Triple-Redundant Power Supply Power Distributor |
| Air Shroud |
MCP-310-38002-0N CSE-PT45 |
1 1 |
SC933 Intel DP X8.X7 PC air shroud 12" x 13" [ Manual ] Air Shroud |
| Backplane |
BPN-SAS-933EL2 |
1 |
3U SAS / SATA Expander Backplane with dual LSI SASX28 Expander Chips |
|
|
 |
 |
 |
| |
Part Number |
Qty |
Description |
| Heatsink / Retention |
- |
- |
Please refer to our Thermal Components Matrix |
| Control Board |
CSE-PTJBOD-CB1 |
- |
JBOD Storage Power-up Control Board |
| Cable(s) |
CBL-0167L CBL-0168L CBL-0108L-02 |
- - - |
SAS 933EL1 BP 1-Port Internal Cascading Cable SAS 933EL2 BP 2-Port Internal Cascading Cable SFF 8087 to SFF 8087 Internal Backplane Cable |
| JBOD Kit - Used for cascading purposes |
CSE-PTJBOD-CB2
CBL-0166L
CBL-0102L
CBL-0168L
MCP-260-00011-0N |
- - - - |
Power Control Card for JBOD
SAS BP External Cascading Cable
I2C CABLE FOR SATA LED, 51CM, LF
SAS933EL2 BP 2-PORT INT. CASCADING CABLE (62 cm)
I/O shield without any opening |
| RAID cards |
AOC-USAS2-H4iR
AOC-USAS2LP-H8iR
AOC-USAS2-S4i
AOC-USAS2-S4iR |
- - - - |
4 int/4 ext ports, supports 240 HDDs
8 int ports, supports 240 HDDs
4 int/4 ext ports, supports 122 HDDs
4 int/4 ext ports, supports 122 HDDs |
| HBA cards |
AOC-USAS2-L8i
AOC-USAS2-L4i
AOC-USAS2-L8i |
- - - |
8 int ports, supports 122 HDDs
4 int/4 ext ports, supports 63 HDDs
8 int ports, supports 122 HDDs |
| Adaptor HDD carrier |
MCP-220-00043-0N |
- |
Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray |
|
|
|
 |
|
|