 |
|
 |
MBD-H8DCE-O |
- H8DCE (Standard Retail Pack)
|
| MBD-H8DCE-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
| CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
| Chipset |
- nVidia nForce Pro 2200 (CK804)
- nVidia nForce Pro 2050 (CKIO4)
|
| |
|
|
| Memory Capacity |
- Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 16 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| SATA |
- nVidia nForce Pro 2200 SATA 3.0Gbps Controller
- nVidia nForce Pro 2050 SATA 3.0Gbps Controller
- 8 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1 support
|
| Network Controllers |
- nVidia nForce Pro 2200 & 2050 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- AC97 audio CODEC with high quality 6-channel sound
- Front-side audio header
|
| |
|
|
| BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Fan Speed Control
|
| |
|
|
| PCI-Express |
- 2 PCI-e x16 slots
(nVidia SLI Technology Supported)
- 2 PCI-e x4 (using x8) slots
|
| PCI |
|
|
|
|
|
|
| 4U Chassis |
|
| Important Chassis Notes |
- To ensure system stability, a 645W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
|
|
| Serial ATA |
- Integrated SATA 3.0Gbps Controller
- Eight Serial ATA Connectors
- Eight SATA hard drives supported
|
| IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
| Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- FUCI
- Up to 8 USB Ports 2.0 Compliant, 1.1 Compatible
|
| Audio |
- 1 Line In / Line Out / Microphone ports
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
| Parallel Ports |
- 1 ECP / EPP parallel port
|
| |
|
|
| Software |
|
| Power Configurations |
- ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, HyperTransport Link voltage 1.2V, memory voltage 2.5V, nVidia nForce Pro 2200 & 2050 voltage 1.5V
- Up to 8 fan status
- Supports System Management Utility
- S3 Suspend To RAM (STR)
|
| FAN |
- Total up to eight 4-pin fan status
- 8 Tachometer Monitoring
- Status Monitor for On/Off Control
- Support 3-pin fans (without speed control)
- Low Noise Fan Speed Control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
|
| LED |
|
| Other Features |
|
| |
| RoHS |
- RoHS Compliant Version Available, Revision 3.xx or later
|
| |
|
|
| FCC |
|
|
Doctor III